Screwdriver with screw holder and screw automatic feeding system
Intro:
RKENS provide professional Screwdriver with screw holder and screw automatic feeding system. The screw locking and feeding machine include 3 parts: 1.Screw feeding system. 2. Screw sorting system. 3. Screw locking system.
With screw feeding system and holder, it can feed and fasten screws fast. This screwdriver with feeding system can save much labor and ensure high efficiency.
Suitable:
Screwdriver with screw holder and screw automatic feeding system, the screws will be meet below requirements.
1. b>=1.3* D
2. Screws should be M2 to M6. 2mm<=d<=6mm
3. 3.5mm<=D<=11mm (D can be Max20mm. It should be better within 3.5-11mm.
Specification:
Screwdriver with screw holder and screw automatic feeding system
| Applicable screws | M2-M6 |
| Efficiency | 50-70pcs/min depend on screw length |
| Screw pocket volume | M2 X 6 5000PCS |
| Speed | 3-5sec/pcs |
| Max Torque | 1-4M |
| Input | 220V/50HZ |
| Power | 30W |
| Machine size | L670*W550*H610mm |
| Noise | below 65DB |
| Weight | 20kg
|
Features:
Screwdriver with screw holder and screw automatic feeding system
1. Automatic screw feeding, sorting and locking for various shapes screws. One-hand operation.
2. Torsion precision and convenient adjustment, ensure the quality of screw locking
3. Turbine feeding, low volume and noise, convenient maintenance. Light weight and small, mobility and save space.
4. Warning function when lack of screws.(Acousto-optic alarm)
5. High efficiency. No need to pick up screws, move screws and put screws. Just need to lock the screws aimed at the screw hole.
6. Sensor controls screws feeding one by one to avoid feeding repetition.
7. Can lock screws very fast, around lock 60 screw per minute.
Working conditions:
1, Screw specification requirements:
The screw length should be over 1.3 times greater than the screw cap’s diameter.
If the screw cap is greater than the screw length, the screw cap may come out first, because the screw will turn over during feeding screws.
The screw length should be less than 45mm.
Welcome to contact our Screwdriver with screw holder and screw automatic feeding system
Product Tags:
|
|
M2-M6 Automatic Screw Feeder And Driver , Auto Screwdriver Machine Feeding System Images
|
